|
|
|
Nobeltec MAX Pro Software Updates |
|
|
|
|
|
|
The updates below (Nobeltec MAX Pro Users) work with Admiral MAX Pro
and VNS MAX Pro software.
Please Note:
Other versions of Nobeltec products cannot be updated by this download, including
beta and pre-release versions. If you have a different version of a Nobeltec product
that needs to be updated, please contact Jeppesen Marine at (800) 946-2877 for the
proper update.
|
|
|
 Nobeltec MAX Pro Users |
|
|
|
|
|
Nobeltec Navigation Software Service Pack 5 |
|
|
|
|
|
This feature pack will update Nobeltec Navigation Software programs, Versions 10
to 10.5.0.15. |
|
|
|
|
10.5.0.15 Highlights
- Improved performance of 3D rendering.
- Improved performance of photo overlay MAX Pro charts.
- Elimination of unnecessary 3D refreshing when displaying MOBs and active marks.
- Improved system performance when large numbers of range circles existed on the system.
- Improved system performance when large range circles were being displayed.
- Improved system performance when operating with an active mark.
- Improved refresh performance when operating with a large number of closed boundaries on the system.
- Fixes a system failure that would occur when deleting large numbers of routes from the chart table.
- Improved system performance when processing frequent heading sentences.
- The sounder cone in 3D is now only displayed when Bathy Recorder is installed.
- Fixed display issues with the Keel marker in the 3D view.
- Fixed issues that caused the program to consume excessive CPU cycles when at idle.
- Fixed issues with Raster charts in NavView not displaying correctly.
|
|
|
|
Nobeltec Navigation Software Updates (9.x and below) |
|
|
|
|
|
The updates below work with Nobeltec Admiral and Visual Navigation Suite Version
9. This software update will update version 9.0.2050 of Nobeltec Navigation Software
products and later to version 9.3.2240.
|
|
|
|
|
Please Note:
- Other versions of Nobeltec products cannot be updated by this download, including
beta and pre-release versions. If you have a different version of a Nobeltec product
that needs to be updated, please contact Jeppesen Marine at (800) 946-2877 for the
proper update.
- If you have a Nobeltec product Version 9.0.2002, you must first update to Version
9.0.2178 and then proceed to update to Nobeltec Version 9.3.2240.
- Tides & Currents will be updated to Version 3.5 (which includes 2007 Daylight
Saving Change) only if you are currently running Admiral 9, VNS Version 9, or later.
For versions earlier than Admiral or VNS 9.0, users must upgrade to Version 9. Please
contact Jeppesen Marine at (800) 946-2877 for upgrade information.
|
|
Version 9 Users |
|
|
|
Version 8 Users |
|
|
|
Version 7 and 7.1 Users |
|
|
|
Version 6.5 Users |
|
|
|
Prior Users Please
Read |
|
|
|
|
|
|
|
Sounder Service Pack 8.1.2002 users |
|
|
|
|
|
|
|
Please Note: This service pack works on Admiral and VNS 8.1.2002
and higher, but is not intended for Admiral and VNS Version 9 users. It will not
work on versions earlier than Admiral or VNS 8.1.2002; it also does not work on
Admiral or VNS versions 7.x or earlier.
Also, Admiral and VNS Version 9 users DO NOT need to install this Sounder Service
Pack; you should install 9.0.2178 instead.
This service pack has an updated sounder support file (Sounderserver.dll) to support
new InSight Sounder hardware.
|
|
|
|
Sounder Service Pack
8.1.2002 |
|
|
|
|
|
|
|
Other Downloads |
|
|
|
|
|
|
|
The updates below work with Nobeltec Tides & Currents and the Tidal Data software
and data packages. |
|
|
|
Special High-Visibility
Cursor |
|
|
|
Dongle Driver |
|
|
|
GPS Transfer Wizard |
|
|
|
Nobeltec Hot Keys (PDF) |
|
|
|
|
|
|
